Instructions for iCalmDog and iCalmCat 2.0a

Using iCalmDog 2.0a 

1. Turning On/Off

Use on/off switch on player bottom. Two audio prompts will sound when turning player on. Make sure to turn off when not in use to save battery life.

iCD20a-instructions-turn-on

2. Enable Micro Sound Cards

Blue light on top button will blink. Simply press this button once and the micro sound card will begin to play. Blue light is now steady.

iCD20a-instructions-play

3. Control the Volume

Increase by holding down right button (+); on lower control panel; decrease by holding left button (–).

Note: DO NOT PLAY AT MAXIMUM VOLUME. It is not good for your dog or the longevity of the speaker. Play at a gentle volume. 

iCD20a-instructions-volume-increase-decrase

4. Track Advance/Rewind

Use same volume buttons (<</>>),  but tap once lightly per track.

iCD20a-instructions-rewind-advance

5. Pause

Middle button on lower control panel (>||).

 iCD20a-instructions-pause-play

6. Low Battery

Top light flashes red and makes frequent sound prompt. When plugging into wall or computer USB port, top light changes to steady blue. Battery is fully charged when tiny red light by power plug goes out. Charging time is 2-3 hrs.

iCD20a-instructions-low-battery

Expanded Functions: Setting Up Bluetooth

Bluetooth_logoThe iCalmDog 2.0a can also be used in Bluetooth mode for cell phones and radio, plus as an external speaker for most computers & smart phones.